Hey all-
Regarding my attempt to add spindle on/off in my core_stepper.hal, the
following lines
newsig spindle_on bit
linksp spindle_on <= motion.spindle-on
linksp spindle_on => parport.0.pin-14-out
get me this error:
EMC2 - 2.0.5
Machine configuration directory is '/etc/emc2/sample-configs/stepper/'
Machine configuration file is 'xyz.ini'
Starting emc...
iocontrol: machine: 'X-Y-Z' version '1.4.2.4'
HAL: ERROR: pin 'motion.spindle-on' not found
HAL:74: link failed
HAL config file /etc/emc2/sample-configs/stepper//core_stepper.hal
failed.
Shutting down and cleaning up EMC...
Cleanup done
I'd appreciate suggestions...thanks.
regards,
Pat
===================
Patrick Ferrick
Town of Webb School
Main Street
Old Forge, NY 13420
(315) 369-3222
(315) 369-6216 (fax)
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
