Chris, Chris Radek <[EMAIL PROTECTED]> writes: > > On Wed, Oct 10, 2007 at 11:42:55AM -0700, Alan Condit wrote: > > Well, I tried it again this morning and it worked. The only thing I > > did different was to move the G40 ahead of the G01 on the one line > > and move the G41 D4 ahead of the G01 on the next line. Then I saw the > > response from Ed suggesting putting the G41 D4 on a separate line > > (which now I don't have to do). Thanks Ed. > > I'm pretty sure neither of these changes matter. Maybe you have > a different tool table now?
I thought that I was having trouble loading the tool table yesterday. This was based on the report from EMC status. I didn't check to see if the status was different today, but I will. What I was seeing was that all of the tool offsets in the status window were 0.0 and there were only four instead of the 32 I had defined. I hate solving problems without knowing how or why they were resolved. Thanks, Alan ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
