On Sunday 04 November 2007, [EMAIL PROTECTED] wrote: >I was running EMC using BDI 4.49. Changed over to EMC2, Ubuntu 6.06. The > mini interface runs on the computer just fine, but the machine no longer > communicates with my stepper box on LPT1. Does anyone know what file > contains the I/O and pin settings for EMC2 on Ubuntu 6.06? > There are two different IO file setups in EMC2 now, one for normal power amps, and one for the xylotex, which uses a different pinout, and is very popular for small mills. You might want to snoop around & see which is in use in your .ini file and try the other. We used to have to make a breakout kit to swap the pins around out of the radio shack rs232 adaptor, and I'm still using it, but should probably pull it out of the cable and use the other setup, but haven't found a round tuit recently.
>W. Bickford >Aiken, SC > > >------------------------------------------------------------------------- >This SF.net email is sponsored by: Splunk Inc. >Still grepping through log files to find problems? Stop. >Now Search log events and configuration files using AJAX and a browser. >Download your FREE copy of Splunk now >> http://get.splunk.com/ >_______________________________________________ >Emc-users mailing list >Emc-users@lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/emc-users -- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If you want divine justice, die. -- Nick Seldon ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
