Because I knew very little about SCR DC motor controllers, I bought a KBIC controller to play with. Well I managed to break it on the second day of playing. My problem now, is to replace the broken bits. I am pretty sure, that what I blew out are a pair of rectifier diodes. I am guessing I could simply replace the diodes with similar parts with the same voltage and current ratings. I would appreciate a confirmation of my guess and any additional advice. The parts in question are next to the question mark here:
http://www.wallacecompany.com/machine_shop/00012-1a.jpg and a close up here: http://www.wallacecompany.com/machine_shop/00013-1a.jpg There is a burned trace above the top part, and I measured zero Ohms in both directions on both parts. Thanks. ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
