I use EAGLE, and would be interested in learning more about this. Javid
----- Original Message ----- From: "Martin Schöneck" <[EMAIL PROTECTED]> To: "Enhanced (EMC)" <[email protected]> Sent: Sunday, January 13, 2008 3:31 PM Subject: [Emc-users] Interested in generating HAL-configuration with EagleCAD? > > Is anyone interested in drawing the HAL-configuration with the EAGLE CAD > schematics-editor (http://www.cadsoft.de)? > > I did not find a tool to configure my emc2 graphically, so I built a > devices-library for Eagle with some of the hal-components (mainly the ones > I > used for my desktop-mill and some additional). > These devices can be used to draw the HAL-config as a normal schematic. > Afterwards a user language program exports the schematic to a .hal-file. > > Its more a workaround than a configuration tool, but if you know Eagle a > bit, > this is a possibility to create the configuration more easy than editing > the > hal-file manually. > > I just want to have some feedback if I should post it in the wiki or > somewhere > else, or if there is better tool I didn't find. > > > --martin > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
