HI, A few days ago I was having problems trying to get my rotary axis to move at an acceptable speed - well, I did it with help from Brian and I thought it was all running hunky-dory. Well, I turned it on again today and found that I couldn't jog any of the axes. So, I went back over the ini file and changed the accelerations and got it jogging again but everything had slowed to a snail's pace. So, I messed about a bit more and got it so that the axis speeds were OK but then G0 wouldn't work on the A axis (seemed to be trying to accelerate too fast). More messing about got G0 working again but now the maximum speed I can get out of the A axis with any command is 60 - previously I had it working quite happily at 400 - and I can't see why this is. I have put my ini file on a web page at http://tinyurl.com/ytl8kc - would some kind soul have a look at it please and tell me what the h**l I've done and, if possible, how to fix it permanently - I have little enough hair left anyway without all this........ ;-) Thanks
-- Best wishes, Ian ____________ Ian W. Wright Sheffield UK "The difference between theory and practice is much smaller in theory than in practice..." ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
