Not a bad idea. I have a PC that I would like to put through the bandsaw! John nice blog.
Dave, do you know where I could find out which Jetway board that Ray may have used? I did a quick search but I didn't find anything. Thanks, Greg John Kasunich wrote: > Ed wrote: >> Greg Pettit wrote: > >>> The problem I have is that even after sever months, my drives, computer, >>> and power supplies are still sitting on a cart. So I thought I would >>> clean things up by putting all the components in a NEMA style enclosure >>> and mounting it to the base of the mill. > >>> Anyone >>> mounted an ATX motherboard in a NEMA enclsoure and fabricated a bracket >>> for the PCI cards? >>> >> How about chopping apart an ATX case and using the relevant section. >> Attachment holes and brackets all in one piece. Ed. >> > > That's what I did. I attacked an old Gateway tower with various > implements of destruction until I had something that held all the > necessary bits and would fit in my NEMA box. > > Note: an optical drive is NOT a necessary bit - if you are connected to > a network (highly recommended), the only time you'll need a CD-ROM drive > is to do the initial install. For that you can just plug the drive in > and balance it somewhere temporarily. > > More info and photos in this blog posting: > http://jmkasunich.dyndns.org/cgi-bin/blosxom/shoptask/pc-cased-and-mounted-12-14-07.html > > Regards, > > John Kasunich > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
