John Thornton wrote: > Robert, > > If you have the line HOME_SEARCH_VEL = n in your ini file EMC will home to > the > switches. > > If you wish to do an offset for the work piece just use the touch off button > after you > are in the desired position. > My mill is not set up with home switches yet so I set the corner of the vise as HOME. In the ini files the HOME_OFFSET=0 so I can home anywhere and for me that is the corner of the vise. If I have to have a workpiece zero in a different location I use touchoff to set my G54-G59 then can gome back to the original HOME with a G53G0X0Y0 then set G54 to that point again. Ed.
------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
