Tony Bussan wrote: > Has anyone got the Mesa 5I20 working with EMC in the mode where it is > just one big block of parallel I/O? > > If no one has, where would I get started writing a driver for this mode? > > I would like to use 3 5I20’s in our mill, 1 in host controller > configuration, and 2 in parallel I/O configuration.
I believe the current hal_m5i20 driver is fixed at 48 I/O pins per board, but I may be wrong about that. I'm working on a driver for the HostMot2 firmware on the 5i20 board (and all the other Mesa Anything I/O boards) that will let you configure all the pins as gpio, if that's what you want. It should be ready for beta testing within a month or so. -- Sebastian Kuzminsky Yes, we have a soul. But it is mechanical. -- Daniel Dennet ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
