you might want to try turning the feed override down to like 1%, with my
little play i have with stepper motors, that's what they do when you try to
run them too fast. I dont know where to find stepconf, you might try
running it from command line? ive never used it.
On Wed, Apr 9, 2008 at 5:56 PM, aaron Moore <[EMAIL PROTECTED]>
wrote:
> Hi EMC
> I am finally the proud owner of three Nema 34 stepper motors, stepper
> drivers and a power supply all wired up with power lights ablaze, ready to
> go. However EMC does not seem to be communicating with them. I get some
> weeere sounds but no movement. I see in the documentation there is a
> configuration wizard, but I can't for the life of me find it. Can someone
> help me out here please.
> All the best
> Aaron
>
> --
> Powered by Outblaze
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
> Don't miss this year's exciting event. There's still time to save $100.
> Use priority code J8TL2D2.
>
> http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
