Thank you Eric, You were right on the money. The worst part is I should have known this, I got stuck in the "stupid" loop and could not get out.
The readout now changes when I turn the servo by hand. Off to connect the I/O's and get my touchscreen working. I am sure I will have more questions before I am finished. Thanks Again, Glenn -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric H. Johnson Sent: Wednesday, April 16, 2008 6:24 PM To: 'Enhanced Machine Controller (EMC)' Subject: Re: [Emc-users] Vital System Error Glenn, The VTI configuration is for the Vigilant Technologies Inc (Vigilant Products) board. I believe you will find the Vital systems configuration under "motenc". Regards, Eric I have loaded my box with Ubuntu and EMC2 following the instructions provided on the download page. I was able to get into the Sim config with no problems. I have a Vital Systems Motenc-lite board and when I pick the VTI config, I get the following error. Debug file information: insmod: error inserting '/usr/realtime-2.6.15-magma/modules/emc2/hal_vti.ko': -1 No such device vti_motion.hal:5: exit value: 1 vti_motion.hal:5: insmod failed, returned -1 8888 PID TTY STAT TIME COMMAND Stopping realtime threads Unloading hal components I looked for the obvious, but I am a total EMC2 and Linux noob, can someone point me in the right direction? ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javao ne _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
