I'm using the 3/4" DA collet with the holder but if they work for you I'll send the others as I don't use them. It's just a couple. keep an eye on e bay for them. BTW the DA collets aren't real good...
John On 3 May 2008 at 15:15, Kirk Wallace wrote: > On Sat, 2008-05-03 at 17:04 -0600, John Thornton wrote: > > I have a couple at work for DA200 I think with a rapid switch 200 > > holder... > > > > John > > > > I am using NMTB 40 holders: > > http://www.wallacecompany.com/machine_shop/Shizuoka/00006-1a.jpg > > Some of them don't have the nuts. I have no collets yet. I need an > NMTB 40 shell (face) mill and JT holders or drill chucks too. Thanks. > > -- > Kirk Wallace (California, USA > http://www.wallacecompany.com/machine_shop/ > Hardinge HNC/EMC CNC lathe, > Bridgeport mill conversion, doing XY now, > Zubal lathe conversion pending > Craftsman AA 109 restoration > Shizuoka ST-N/EMC CNC) > > > ---------------------------------------------------------------------- > --- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference > Don't miss this year's exciting event. There's still time to save > $100. Use priority code J8TL2D2. > http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com > /javaone _______________________________________________ Emc-users > mailing list Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
