So, am I correct in assuming that the card does not have to be there for hal to load the driver for the pins? Everything is in hal show as it should be except I don't have the card in......I take it we are probably going to have to write a driver here? I am not a C programmer but I'll try anything once.......
Thanks Jeff, Dave ----- Original Message ----- From: "Jeff Epler" <[EMAIL PROTECTED]> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Sent: Sunday, May 04, 2008 9:39 AM Subject: Re: [Emc-users] 8255 driver > On Sun, May 04, 2008 at 08:54:02AM -0400, Dave Keeton wrote: >> I reloaded the pci_8255 driver and commented out the ax. Now it shows 72 >> i/o >> pins in hal show. I still had no luck seeing inputs change states. Just >> an >> update. > > The so-called "pci_8255" driver in emc is *only* for the futurlec card > with 3 8255 chips and a tiger-320 PCI bridge. It will not work without > modification on any other type of card. (and according to user reports, > not even that card works when any of the ports are set to input mode) > > Jeff > > ------------------------------------------------------------------------- > This SF.net email is sponsored by the 2008 JavaOne(SM) Conference > Don't miss this year's exciting event. There's still time to save $100. > Use priority code J8TL2D2. > http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users