In the Integrators manual (2.2.6) look in 6.3.7 [Axis_<num>] Section. The MAX_VELOCITY and MAX_ACCELERATION for the individual axis will not be overridden no matter what the jog slider shows.
John On 13 Aug 2008 at 17:05, Christopher Purcell wrote: > On a machine that has rather different axes, with different maximum > velocities, I find it inconvenient that Axis (as I know how to use it) > seems to read only one value for MAX_LINEAR_VELOCITY from the [TRAJ] > section of the .ini file and uses this to determine the Jog Speed > range for all 3 axes (of a simple 3 axis stepper setup).Is it > possible to configure Axis, through the .ini file to have different > maximum Jog Speeds, one for each axis? This would let me jog my fast > axes briskly, without the risk of losing steps on my slow one. Right > now I have to set a MAX_LINEAR_VELOCITY appropriate to the slowest > axis, which is a pain. > > > [EMAIL PROTECTED] > > > > > ---------------------------------------------------------------------- > --- This SF.Net email is sponsored by the Moblin Your Move Developer's > challenge Build the coolest Linux based applications with Moblin SDK & > win great prizes Grand prize is a trip for two to an Open Source event > anywhere in the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users