> Message: 5 > Date: Sat, 20 Sep 2008 16:20:52 -0700 > From: Dave Engvall <[EMAIL PROTECTED]> > Subject: Re: [Emc-users] 5 axis cinci test > To: "Enhanced Machine Controller \(EMC\)" > <[email protected]> > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed > > Nice demo Stuart. It just rubs in what most of us can't do, at least > with a single setup. > Programmed in APT right?
yes - this is programmed using NCL - which is APT language > > Dave > > Interesting part, would have liked a good view of the surface finish > after it was done. > (Probably can't, due to proprietary parts.) But, certainly looks like > it is working well! actually, this is just a part to check the accuracy of the cuts there are pictures showing the part pretty close each of the holes have three diameters - one drilled and two bored with end mills the two bored with end mills are positioned from two directions to check for positioning accuracy from both directions www.mpm1.com:8080/cinci/s1030676.jpg thru s1030681.jpg thanks Stuart ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
