>
> > [snip]
>
> > Since my X axis is the most active (and Z the least) using the X axis
> > as a amp enable should always keep the Z axis ready (yes?).
>
> All the amp enables turn on at the same time, so it doesn't matter which
> one you use.
This makes me feel better. I was considering rewiring the board in such a
way that each axis had a seperate pin. Glad I did not waste time doing
that.
>
>
> > When I added this line, I could not get EMC to run. EMC is on an
> > isolated machine ATM and I don't have a thumb drive available to
> > download the error report. When I comment out the line, the
> > configuration runs normal.
>
> Without seeing the actual error, all I can do is guess.
>
> My guess is that you didn't remove the previous connection to parport
> pin 1. This results in an error when the line you added gets executed.
> Search for pin-01 in the hal files and you'll likely see two (or more)
> places where it's used.
>
> - Steve
>
I thought this might be the possible problem. It was getting quite late and
had already powered down when I sent the email. I will check the HAL file
tonight for other pin-01 connections and retry. If I continue to get
errors, I will drop the files and error reports into the pastbin.
Thanks for the followup.
Brian
>
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge
> Build the coolest Linux based applications with Moblin SDK & win great
> prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
