I would guess you are right on the edge... If you used stepconf to generate your config try putting a larger number in for the latencey test this will allow more time for other things to happen like drawing the screen...
John On 3 Dec 2008 at 7:19, ulises barrera wrote: > Hi everybody > > First of all, I am using EMC2 on an old system it is a > Celeron 850 MHz coppermine CPU with 192 MB RAM > the machine is a wood router with 3 axis system from xylotex > the version of EMC2 is 2.2.7 from the 6.06 ubuntu version > I had installed the 8.04 hardy version but this older version > runs a little better on this machine. > > OK the problem is when i load a part program with axis > the system slows down and it looks like is loading the whole > program into RAM which is a problem if the file is big and > the memory is low. > > I am actually using xemc as it does not have this problem > but i miss the home all axes in sequence functionality. > > Sorry for my bad English and thanks for any suggestion you can > give me > > Regards > > Ulises > > > > > -------------------------------------------------------------------- > ----- > This SF.Net email is sponsored by the Moblin Your Move Developer's > challenge > Build the coolest Linux based applications with Moblin SDK & win > great prizes > Grand prize is a trip for two to an Open Source event anywhere in > the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
