Eric H. Johnson wrote: > Was there any significant change between 2.2.7 and 2.2.8 for the hostmot2 > drivers. I just rebuilt a box so I could test away from the machine, and > installed from the 2.2.8 binaries. I then ported my working 2.2.7 > configurations over to the new box. > > On loadrt hostmot2, or loadrt hm2_5i20 I am getting an insmod failed. I can > pastebin the output from dmesg, but all I am really asking is if there was > any change in syntax, paths or file names between the two versions?
I just reread this... Does your new test computer have a 5i20 card in it? If not, the driver won't load. Or, more correctly, the driver will load but wont export any HAL objects until you hot-plug an AnyIO board. Please make sure your hardware supports hot-plugging before attempting this. ;-) -- Sebastian Kuzminsky "Okay, people. Now is the time to start discussing the rules of war for autonomous robots. Now, when it's still theoretical." -- Bruce Schneier ------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
