To create custom panels you use pyVCP as described here: http://www.linuxcnc.org/docs/devel/html/hal_pyvcp.html#r1_5_10
John On 12 Jan 2009 at 2:02, Steve Blackmore wrote: > On Thu, 08 Jan 2009 06:55:51 -0500, you wrote: > > >> The new algorithm handles concave corners > > > >And here I am, halfway through writing the next installment > >of Adventures in Filleting, explaining how to lay an arc > >into a concave corner to avoid gouging. I am crushed, I > >tell you, -crushed- by this horrible news! > > Are you guys reading the Mach forum? <G> > > Background developments seems to following Mach very closely! > > The big bit that's missing/difficult (nigh impossible for us new > guys) > in EMC is GUI screen editing (the user interface) and is the main > reason > I can't use it on a day to day basis. > > I need to write some custom turn screens for a large OEM. that > include a > tool changer screen that has user adjustable values. I'm stuck with > Mach > that has other technical issues. > > Can anybody help, or point me in the right direction? > > > Steve Blackmore > -- > > -------------------------------------------------------------------- > ---------- > Check out the new SourceForge.net Marketplace. > It is the best place to buy or sell services for > just about anything Open Source. > http://p.sf.net/sfu/Xq1LFB > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Check out the new SourceForge.net Marketplace. It is the best place to buy or sell services for just about anything Open Source. http://p.sf.net/sfu/Xq1LFB _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users