http://linuxcnc.org/docs/2.2/html/gcode_main.html#sub:Unary-Operation-Value http://linuxcnc.org/docs/2.2/html/examples_gcode.html http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Oword http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Example_G-Code_Programs
Also a nice reference http://linuxcnc.org/docs/html/gcode.html sam ----- Original Message ----- From: <sa...@free.fr> To: <emc-users@lists.sourceforge.net> Sent: Friday, February 20, 2009 6:41 PM Subject: [Emc-users] EMC2 Syntax for Math Formulas > > > Hello, > > The Sherline rotary table works fine. I am now trying to insert formulas > in my > program such as SQRT(value), SQUARE, COS, ATAN... > > Is there a documentation that shows the proper syntax to use? > > For instance I would like to check that [value1]^2 will return the square > of > value1. > > Thanks for pointing me to the right direction. > > Best Regards, > > Patrice > Portland, OR > > ------------------------------------------------------------------------------ > Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, > CA > -OSBC tackles the biggest issue in open source: Open Sourcing the > Enterprise > -Strategies to boost innovation and cut costs with open source > participation > -Receive a $600 discount off the registration fee with the source code: > SFAD > http://p.sf.net/sfu/XcvMzF8H > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.0.237 / Virus Database: 270.11.1/1962 - Release Date: 02/20/09 07:26:00 ------------------------------------------------------------------------------ Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise -Strategies to boost innovation and cut costs with open source participation -Receive a $600 discount off the registration fee with the source code: SFAD http://p.sf.net/sfu/XcvMzF8H _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
