On Wednesday 18 March 2009 09:07, Kirk Wallace wrote: > I have a friend with a couple of 80's vintage Mori Seiki's and a > Matsuura, all with Yasnac controls. He wants to move g-code files > through the serial ports with a laptop. I made a cable, set the serial > port parameters and was able to get characters to a terminal emulator on > the laptop. The problem is that some of the characters are not presented > on the screen properly. My guess is that what is coming across is a tape > code and the terminal needs ASCII. Is my guess correct? Will I need to > buy BTR software or is there another way to save and load g-code through > the controller serial ports?
some of the early Yasnac controls have speed issues we had one that would take most of a program from the laptop but randomly replaced characters with what looked like Japanese letters it might help to add a small line and character delay in your terminal program and to set the buffer size as low as it will go on the hardware config tab or set the control to a lower baud rate Brian -- "Nemo me impune lacesset" ------------------------------------------------------------------------------ Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users