Has anyone used Vitalsystems Motenc-Lite (7544)? Is there any significant difference (in rapid moves) by running the machine with 7i43-P or 5i20?
--- On Sun, 3/29/09, Sebastian Kuzminsky <s...@highlab.com> wrote: > From: Sebastian Kuzminsky <s...@highlab.com> > Subject: Re: [Emc-users] MESA 7I43 and 7I33 OR 5I20 and 7I33 OR > MOTENC-LITE(7544) > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Date: Sunday, March 29, 2009, 5:53 PM > Shabbir Hussain wrote: > > I need to retrofit an old CNC Lathe machine with > SIEMENS Servo Motors. The servo drives accept +/- 10V as > velocity command. My question is which of the following > combination is suitable to be used for interfacing these > servos and differential encoders. > > > > 1. MESA 7I43-P with 7I33 > > 2. MESA 5I20 with 7I33 > > 3. MOTENC-Lite PCI (7544) > > > > Can I use MESA 7I33 with MESA 7I43-P? > > Either the 7i43-P or the 5i20, together with the 7i33, > would probably > work well for you. > > I prefer the 5i20 over the 7i43-P because PCI is so much > easier to deal > with than the EPP parallel port, and it's an order of > magnitude faster. > > I dont know wnything about the MOTENC-Lite. > > > -- > Sebastian Kuzminsky > All my desires and ruminations are no more and no less than > eddy > currents generated by the gradual exhalation of our > universe. > And until this great exhalation is finished, my thoughts > live on. > <http://tinyurl.com/c2t5rb> > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
