May need clarification. When I hit the play button to start executing the gcode.. the spindle turns off..
- Michael On Apr 7, 2009, at 7:51 PM, Michael Jones wrote: > I am attempting to run my first GCode program under EMC and am seeing > something strange. > > I am using the Axis interface. When I click on the spindle start > button (the circle arrow) the spindle starts. When I click the stop > button the spindle stops just as I would expect. > > When I start a program however, the spindle stops and the start button > grays out. > > Any ideas on what's happening? What do I have mis-configured? > > Thanks, > > - Michael Jones > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by: > High Quality Requirements in a Collaborative Environment. > Download a free trial of Rational Requirements Composer Now! > http://p.sf.net/sfu/www-ibm-com > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ This SF.net email is sponsored by: High Quality Requirements in a Collaborative Environment. Download a free trial of Rational Requirements Composer Now! http://p.sf.net/sfu/www-ibm-com _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
