I have been using EMC for about 5 years and just upgraded to EMC2, using AXIS as the display program. I love AXIS, except for one thing: After putting a msg, command in the part program, and issuing an M0 command right after, I have to click on two separate things to restart the part program. First I have to close the message pop up box that is launched from the (msg, Raise cutter and press resume to continue) box, then I have to press the "S" key on the keyboard to continue running the program. I have a 2 axis mill right now so this is lot of mouse clicking and navigating for no good reason. Am I missing something easy? Is there a simple "one keystroke" method to resume from a pause, so I am not navigating the keyboard all the time? This gets pretty cumbersome, especially when drilling a lot of holes and doing lots of cutter lifts and lowers. Thanks for any ideas any of you can provide.
------------------------------------------------------------------------------ Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
