On Sunday 10 May 2009, Péter Bocska wrote:
>Hello,
>
>I have found on this list a very good software for engraving:
>http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?InkscapeHowto

This page seems to be a very good howto.  Unforch, the links to the code 
aren't working, they fetch some html code that I haven't looked at, labeled as 
a tar.gz.
>
>And with these files the Inkscape makes nice G-code:
>http://dp.jstenback.com/gcode/

This link works.  Is it the same code?  I'm reading the discussion that starts 
on page 4 of the wiki links printout and its confusing with so many links to 
the working code.

>Only issue is that the result is in inch, but with small modification in the
>python script:
>
>        # 0.001 = inch, 0.2822222 = mm
>        xScale = self.options.scaleX  * 0.2822222 # 8.5 / 744.1
>        yScale = self.options.scaleY * -0.2822222 #-11.0 / 1052.37
>
>and:
>
>        # G20 = inch, G21 = mm
>        self.write("G21\nF%.4f\n" % feed)
>
>the script makes nice G-code in mm.
>
>Regards,
>Peter

Thank you very much Peter.  As I'm currently working on a rumba box, this 
could come in handy indeed!

-- 
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Arithmetic is being able to count up to twenty without taking off your shoes.
                -- Mickey Mouse



------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image 
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to