Michael Jones wrote: > Rob, > > I've been noticing the same thing lately. Very similar hardware > setup.. very similar symptoms after a gcode file of about 20,000 lines > (fine line engraving). > > Has anyone seen anything like this? Is there a solution? > > Several people have reported such behavior in the last couple months. There may have been a recent update to Axis that may help this situation.
I have a torture test program that commands a 2" diameter circle made up of 10000 G01 moves at 60 IPM. The first time I run it, it often runs fine, after that it suffers motion queue starvation and begins to run in spurts and pauses. I'm not sure this is the same problem. I really ought to run this with TkEMC and see if there is a difference. The computer is a 600 MHz Pentium, so at the bottom range of CPUs, today. Jon ------------------------------------------------------------------------------ OpenSolaris 2009.06 is a cutting edge operating system for enterprises looking to deploy the next generation of Solaris that includes the latest innovations from Sun and the OpenSource community. Download a copy and enjoy capabilities such as Networking, Storage and Virtualization. Go to: http://p.sf.net/sfu/opensolaris-get _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
