Yes, G0Z10 should be executed first. Then the other move G0X5Y8 Regards,
--- On Fri, 6/12/09, Rainer Schmidt <lemonn...@gmail.com> wrote: > From: Rainer Schmidt <lemonn...@gmail.com> > Subject: Re: [Emc-users] Successive G0 moves > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Date: Friday, June 12, 2009, 3:37 PM > On Fri, Jun 12, 2009 at 6:24 PM, > Shabbir Hussain<s_hussai...@yahoo.com> > wrote: > > > > G0 should not be used for cutting. It is only for > positioning when the tool is at safe Z height (out of > workpiece and clamps etc.). I have worked with Fanuc and > Siemens controllers. In these controllers when G0 move is > programmed, all the axis used in G0 move starts moving at > rapid feeds (set in the parameters of the controller) and > the axis that achieve the position just stops and others > continue to run. So G0 move produces a non-linear move. This > is normal behaviour. > > > > So G0 move should finally achieve the target position > not the linear path. That is why it must be used for > positioning. > > > > Thanks > > > > Shabbir Hussain > > Would > G0Z10 > G0X5Y8 > Posiiton Z first and then x and y? I did not spend to much > thought > about this and find this thread potentially disaster > avoiding... > Rainer > > ------------------------------------------------------------------------------ > Crystal Reports - New Free Runtime and 30 Day Trial > Check out the new simplified licensing option that enables > unlimited > royalty-free distribution of the report engine for > externally facing > server and web deployment. > http://p.sf.net/sfu/businessobjects > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
