thanks guys - it is working now On Mon, Jun 29, 2009 at 7:32 PM, Chris Morley<chrisinnana...@hotmail.com> wrote: > > Stuart: > > If I understand the problem you can't edit the rung because > you have to 'make active' the rung first (each rung is 6 lines wide). > scroll the page till you see the rung you want to edit. > You should see a colour change around the left and right > sides (black to red). Red is the 'active' rung. It seems that > while scrolling up vrs down the point that it switches is > different. > Anyways once you have the red border in the right rung. > hit the edit button and modify. I'm sure you can get it from there. > > Chris Morley > >> Date: Mon, 29 Jun 2009 16:17:03 -0500 >> From: stus...@gmail.com >> To: emc-users@lists.sourceforge.net >> Subject: Re: [Emc-users] classicladder not functioning >> >> John, >> The problem (at this time) is not the knowledge of the needed >> change it is the how to do it. I do not know how to get the CL editor >> to edit the rung the timer is in. The CL editor picks the other rung >> to edit. >> thanks >> Stuart >> >> On Mon, Jun 29, 2009 at 5:10 PM, John Thornton<bjt...@gmail.com> wrote: >> > Stuart, >> > >> > I missed some of the chat on this but in your image you need to connect C >> > and E together >> > or the timer will not work. >> > >> > http://www.linuxcnc.org/docview/html//ladder_classic_ladder.html#r1_7_3 >> > >> > John >> > >> > On 29 Jun 2009 at 14:56, Stuart Stevenson wrote: >> > >> >> I just got back and looked at the configs and wiki. I don't use >> >> %W's. >> >> The link did not help me. >> >> I >> >> >> >> On Mon, Jun 29, 2009 at 11:39 AM, Chris Radek<ch...@timeguy.com> >> >> wrote: >> >> > On Mon, Jun 29, 2009 at 10:19:18AM -0500, Stuart Stevenson >> >> wrote: >> >> >> Gentlemen, >> >> >> Ubuntu 6.06 >> >> >> EMC2-trunk (git pull this morning) >> >> >> Cinci 5axis machine >> >> >> the var %I7 shows on >> >> >> the section dislay %I7 is not on and the lube timer does not >> >> run >> >> >> screen shot is here http://imagebin.org/53991 >> >> > >> >> > >> >> > This must be an old ladder you've brought forward from 2.2. >> >> The >> >> > timer change, and other important things you should know, are on >> >> the >> >> > UPDATING page. >> >> > >> >> > >> >> http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?UPDATING#Classicladder_c >> >> hanges >> >> > >> >> > >> >> > >> >> -------------------------------------------------------------------- >> >> ---------- >> >> > _______________________________________________ >> >> > Emc-users mailing list >> >> > Emc-users@lists.sourceforge.net >> >> > https://lists.sourceforge.net/lists/listinfo/emc-users >> >> > >> >> > >> >> >> >> >> >> >> >> -- >> >> you can lead a person to knowledge >> >> but you cannot make him think >> >> >> >> -------------------------------------------------------------------- >> >> ---------- >> >> _______________________________________________ >> >> Emc-users mailing list >> >> Emc-users@lists.sourceforge.net >> >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > >> > >> > >> > ------------------------------------------------------------------------------ >> > _______________________________________________ >> > Emc-users mailing list >> > Emc-users@lists.sourceforge.net >> > https://lists.sourceforge.net/lists/listinfo/emc-users >> > >> > >> >> >> >> -- >> you can lead a person to knowledge >> but you cannot make him think >> >> ------------------------------------------------------------------------------ >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users > > _________________________________________________________________ > We are your photos. Share us now with Windows Live Photos. > http://go.microsoft.com/?linkid=9666047 > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > >
-- you can lead a person to knowledge but you cannot make him think ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users