Hi Frank, thanks for the report. The _best_ thing you can do, is report this issue as a new bug at: http://sourceforge.net/tracker/?group_id=6744&atid=106744
That way it would surely not be forgotten. Regards, Alex ----- Original Message ----- From: "Frank Tkalcevic" <[email protected]> To: "'Enhanced Machine Controller (EMC)'" <[email protected]> Sent: Monday, July 06, 2009 1:50 AM Subject: [Emc-users] G76 inifinite loop > If I put in an invalid G76 threading command in some gcode, such as... > > > G76 P1.6 Z0 I-1.6 J0 K1.6 R2 H0 E0 L0 > > > Where J, the initial depth of cut, is 0, axis gets stuck in an infinite > loop. Obviously this is wrong because the thread will never finish, but > it > took me an hour to track this down (bug in my script). There's a similar > result doing this in the MDI. An error/warning would be nice. > > Frank > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
