Hi Michael Thanks a lot. My toolchanger is like this from usovo.de : http://www.usovo.de/shop/product_info.php?info=p316_full-automatic-tool-changer-system-for-MF70.html
The pockets is separated by a fixed amount of 20mm and as can be seen on the photos it has to be in parallel with the Y-axis of the machine else I have to twist my mind when drawing my small parts :-) The tool release and pickup can be programmed from sheetcam. /Niels > Hi Niels > > This was my patch and it is very specific to my machine. > And yes there are some part skipped (y rack position). > Give me specific information about your toolchanger and I'll update patch to 2.3.3 source line. > > regards, > Michael > > Niels Jalling napisał(a): >> Hi >> I have tried the RackToolChanger patch but it only works when the rack is >> placed parallel to the X-axis and mine is placed parallel ti the Y-axis. >> The Z-axis moves up and down but no movement to the desired tool place. Another issue is that the patch does not work on the emc2_2.3.2 source. /niels >> ------------------------------------------------------------------------------ _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------------ _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
