> EMC2-2.3.3 (robert) > From: robert <[email protected]> > Date: October 9, 2009 4:42:10 AM PDT > To: "Enhanced Machine Controller (EMC)" <[email protected] > > > Subject: Re: [Emc-users] Max velocity suddenly limited to that of > slowest axis EMC2-2.3.3 > Reply-To: "Enhanced Machine Controller \(EMC\)" > <[email protected] > > > > > >> >> Does the max-velocity slider have any effect? >> > as andy said > i had this problem a while back slider set to 10m/min slider is a > overall max velocity of the overall combined join velocity so > increase it and see what happens > > robert > OK, I did a little more checking. In "Axis" I can set the jog speed slider up to 210ipm but the Max_velocity slider won't go above the 15ipm. Using the jog keys the z-axis will jog at it's max_velocity of 120ipm and the X-axis will jog at it's max_velocity of 15ipm. But if I go into MDI mode and do a G0 the z-axis will not exceed the 15ipm of the max_velocity slider.
Same in running a gcode file g0 is limited to 15ipm for either axis. The Max_Velocity slider should allow me to set the 120ipm but it won't. I still don't know if the problem is actually in the "Axis" setup or in EMC2 proper. I do know that it was working in emc2-2.3.1 and is not working in 2.3.3. I never even tried 2.3.2. Alan --- Alan Condit 1085 Tierra Ct. Woodburn, OR 97071 Email -- [email protected] Home-Office (503) 982-0906 ------------------------------------------------------------------------------ Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
