i just want to let every one know i have now added a EMC2 post processor onto the Wiki for all to use.
Functions Available: 1. 3 axis Simultaneous (4 & 5 Index) 2. G43 Hight Compensation. 3. G40, G41 & G42 Cutter Compensation. 4. Hole Cycles: G81 G82 (Dwell Support), G83 & G73 5. Metric & Imperial (G21, G20). 6. Use with CAMWorks Only. 7. Rigid Tapping Support G33.1 XYZ K (right hand only) 8. Subprogram Support (CALL, SUB, ENDSUB) 9. Outputs in *.NGC saved File. 10. Coolant Modes (M08 Flood,M09 Off,M07 Mist, M50 Through Hole) 11. Boring Cycles Support (G85,G89) 12. Feederate output in Units/Min 13. M00, M01 Stop code Support. 14. G10 L20 Support. 15. Axis Support, 4=A, 5=B indexing only Nown Issues: 1.No G61 option Support : To be added as post option 2. 5 axis Simultaneous to be tested SubProgram Support: Subprogram support works as follows: setup a grid of parts, define one(or more) tool operation for one part applying it to all sub parts. output will generate a sub program for that tool, and call the sub program when needed. G_Work_Cord supported with subprograms, G10 L20 also supported with sub calls so one can have unlimited known datums one one G_Work_Cord (G54 example). (see sample NGC and Part file for sub layout) any one that uses camworks please report any problems and i will do my best to fix them, i plan to keep post processor as up to date as i can with any new functions added to EMC2 enjoy robert ------------------------------------------------------------------------------ Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
