On Thu, 2010-01-28 at 10:24 +0000, Andy Pugh wrote: > On 28 January 2010 08:00, <a...@conceptmachinery.com> wrote: > > > Does this type of round stock 1.5”-2” with one end machined to hold C5 > > collet exist or I need to machine everything? > > Would R8 work? You can buy replacement/conversion spindles in R8 and > MT3 for the Mini Mill. > http://www.littlemachineshop.com/products/product_view.php?ProductID=1407&category=6 > > (I think that other than the location of the thread R8 and 5C are the same)
Just in case: http://www.dunhamtool.com/5c_collet.html http://www.dunhamtool.com/r8_collet.html -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ The Planet: dedicated and managed hosting, cloud storage, colocation Stay online with enterprise data centers and the best network in the business Choose flexible plans and management services without long-term contracts Personal 24x7 support from experience hosting pros just a phone call away. http://p.sf.net/sfu/theplanet-com _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users