Hello,
I am using a mesa 5i20 for general purpose I/O. All pins are
gpio. This is what I am doing.....
setp hm2_5i20.0.gpio.000.is_output 1
net classicladder.0.out-00 => hm2_5i20.0.gpio.000.out
When classicladder.0.out-00 is on hal config shows that
hm2_5i20.0.gpio.000.out is also on but I get no output out of the opto22
module. The led on the opto board doesn't light up either. If I check an input
with the same cable on a different opto board through a different 5i20 port it
works fine and shows in hal config also. Any clue on what is causing this? I
want to use 48 I/O pins with 24 inputs on one opto board and 24 outs on the
other. In other words my ins are working but my outs are not.
Thanks,
Paul
------------------------------------------------------------------------------
SOLARIS 10 is the OS for Data Centers - provides features such as DTrace,
Predictive Self Healing and Award Winning ZFS. Get Solaris 10 NOW
http://p.sf.net/sfu/solaris-dev2dev
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
