Hi there,

I am a new EMC2 user and am trying to configure a PCMCIA Card Parallel  
Port on a Compaq Presario v2000 laptop.

I have read that the card can do CNC, so I am optimistic that it will  
work.
http://www.newegg.com/Product/ProductReview.aspx?Item=N82E16839328010

The problem I am encountering is that parallel port seems to be  
disabled.
Running "sudo lspci -v" gives me the following output:

-----------------------------------------------------
07:00.0 Communication controller: NetMos Technology PCI 1 port parallel
adapter (rev 01)
        Subsystem: LSI Logic / Symbios Logic Unknown device 0010
        Flags: medium devsel, IRQ 11
        I/O ports at 3410 [disabled] [size=8]
        I/O ports at 3418 [disabled] [size=8]
        I/O ports at 3420 [disabled] [size=8]
        I/O ports at 3428 [disabled] [size=8]
        I/O ports at 3430 [disabled] [size=8]
        I/O ports at 3400 [disabled] [size=16]
-----------------------------------------------------

I found a similar issue previously posted here:
http://www.mail-archive.com/emc-users@lists.sourceforge.net/msg11633.html

But am unable to find any bios setting to turn off 'plug & play', nor  
am I able to locate the 'enable' file for the device.
Does anyone know where I should be looking to find this file?
Or if there is another way to enable the device?

Thanks in advance,

Karl


------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to