You should use VOLATILE_HOME ini file option to make it work. http://www.linuxcnc.org/docview/devel/html//config_ini_config.html , section 2.2.9.1
Regards, Michael Alex Joni pisze: > Hi, > > this has been just fixed in git for 2.4~pre > > http://git.linuxcnc.org/?p=emc2.git;a=commitdiff;h=67944f4 > > Regards, > Alex > > ----- Original Message ----- > From: "Slavko Kocjancic" <[email protected]> > To: "Enhanced Machine Controller (EMC)" <[email protected]> > Sent: Friday, April 16, 2010 11:30 AM > Subject: [Emc-users] Unhome on ESTOP > > > >> Hello... >> >> I looking for solution how to "unhome" machine if Estop button is pressed. >> If I pressed ESTOP the power to the motor's are killed. So when I relase >> estop and engage power the position on display is wrong. I find best >> solution is to flag axis as unhomed to force rehoming. >> Just can't find right pin where to connect estop button to clear homed >> flag. >> >> Any help? >> >> Slavko. >> >> > > > ------------------------------------------------------------------------------ > Download Intel® Parallel Studio Eval > Try the new software tools for yourself. Speed compiling, find bugs > proactively, and fine-tune applications for parallel performance. > See why Intel Parallel Studio got high marks during beta. > http://p.sf.net/sfu/intel-sw-dev > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
