hello! where can i find configure file ! what's configure file for anyway? it is not the same file when emc2 working use,yes or no thanks for you replay 2010/6/30 Mark Wendt <mark.we...@nrl.navy.mil>
> On 06/30/2010 07:37 AM, Viesturs Lācis wrote: > > Hello! > > > > I have 2 questions about EMC2, I hope that somebody can point me into > > some useful direction. > > 1) Is there a way to update from 2.4.0 to 2.4.1 on Lucid? > > > > 2) I have been trying to compile EMC2 on Lucid without any success. > > > > What I did: > > Acquired EMC2 source by executing: > > git clone git://git.linuxcnc.org/git/emc2.git emc2-dev > > > > VERSION file says that I have got source of EMC 2.5~pre. > > > > Then I opened README file and tried to follow instructions: > > cd /home/waterjet/emc2-dev/src > > ./configure --enable-run-in-place > > > > And for last command I get: > > bash: ./configure: No such file or directory > > > > Andy suggested this command to get additional packages installed: > > sudo apt-get install build-essential fakeroot debhelper libpth-dev > > libgtk2.0-dev kernel-wedge tcl8.4-dev tk8.4-dev bwidget python2.5-dev > > python-tk python-dev libglu1-mesa-dev libgtk2.0-dev > > libgnomeprintui2.2-dev libncurses5-dev libxaw7-dev gettext > > libreadline5-dev lyx texlive-extra-utils imagemagick tetex-bin > > tetex-extra groff qt3-dev-tools > > sudo apt-get install build-essential fakeroot debhelper libpth-dev > > libgtk2.0-dev kernel-wedge tcl8.4-dev tk8.4-dev bwidget python2.5-dev > > python-tk python-dev libglu1-mesa-dev libgtk2.0-dev > > libgnomeprintui2.2-dev libncurses5-dev libxaw7-dev gettext > > libreadline5-dev lyx texlive-extra-utils imagemagick tetex-bin > > tetex-extra groff qt3-dev-toolssudo apt-get install build-essential > > fakeroot debhelper libpth-dev > > libgtk2.0-dev kernel-wedge tcl8.4-dev tk8.4-dev bwidget python2.5-dev > > python-tk python-dev libglu1-mesa-dev libgtk2.0-dev > > libgnomeprintui2.2-dev libncurses5-dev libxaw7-dev gettext > > libreadline5-dev lyx texlive-extra-utils imagemagick tetex-bin > > tetex-extra groff qt3-dev-tools > > > > For several packages I got answer that they do not exist: I remember > > lyx, tetex-extra. > > For several packages I got answer that I should choose another one, > > which is equivalent, for example instead of python2.5-dev I should > > install python-old-doctools, but there were few more. > > > > What am I missing here? I suspect that it is some very basic mistake, > > as I do not yet have any experience with compiling and building > > applications in Linux. > > > > with best regards, > > Viesturs > > Viesturs, > > Does the configure file actually exist in that directory? If it > does, > and the command is failing, you probably need to change the permissions > on the script. "chmod 750 configure" run on the command line in the src > directory if the file exists there will make it executable. > > Mark > > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Sprint > What will you do first with EVO, the first 4G phone? > Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users