Hi Ed, accidentally I saw your mail, since the last one was probably filtered...
Since I got no reasonable feedback on Eagle2HAL I only used it for my own configuration and did neither update the wiki nor my own page. If it helps, have a look at the snapshot I pushed on my server. It includes a newer library, some changes, and new projects, where I also tried to use a joypad (sucessfully but not satisfying): http://martin.yaelbz.de/hal-write/hal-write-2010-10-19.tar.gz I did not use it since a while, thus can not promise if its working. Naturally it is as bad documented as the predecessor. But maybe you'll need Eagle 5.x for the new version. I'm a bit busy at present, but will try to answer your questions, just keep 'eagle' in the subject. Martin Am 19.10.2010 03:03, schrieb Ed Nisley: > Is anybody out there using Martin Schoeneck's Eagle2HAL configuration > program? > > http://wiki.linuxcnc.org/emcinfo.pl?Eagle2HAL > > I'm writing up my Logitech gamepad Joggy Thing for Digital Machinist and > realized that it's *much* easier to talk about circuit diagrams than > lines of HAL code. I remembered Martin's work and decided that if I was > going to draw schematics, I might as well get the HAL code for free. > > An email to the address given on the wiki page seems to have vanished > (no bounce, but no reply after several days). A search for > > "martin shoeneck" eagle > > produces exactly one hit: > > http://martin.yaelbz.de/hal-write/ > > The main URL is essentially blank. Now, Martin may be on vacation, > but ... it sure looks like an orphan project to me. > > So far, I've updated his hal-write.ulp script to handle (some of) the > new devices introduced in EMC 2.4.x, added a few devices to > hal-config.lbr, and am slowly figuring out how the whole thing works. > > I can take the changes far enough to scratch my itch, which is basically > handling halui / hal_input device configuration. The intricacies of the > schematic he used as a testcase / example / demo are *far* beyond what I > need or can verify! > > Has anybody else been tinkering with Eagle2HAL? Any suggestions on what > to do or how to do it? > > Thanks... > > > ------------------------------------------------------------------------------ Download new Adobe(R) Flash(R) Builder(TM) 4 The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly Flex(R) Builder(TM)) enable the development of rich applications that run across multiple browsers and platforms. Download your free trials today! http://p.sf.net/sfu/adobe-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
