I'm really fed up with the issues that have been cropping up with my Ahha Artisan lately. I recently scored a decent Dell 2gHz computer and have done an EMC install. Sorry, don't recall at the moment the exact moment, but it's very recent if not current version.
There are some minor differences in how programs are coded between the two. I was wondering if anyone has gone through the process of editing programs for the conversion, and has any tips to offer. I'll also need a parallel breakout board and asking for recommendations. Initially I will use it to interface to a 2nd DB37 breakout I have from an older Ahha setup. This would allow me to quickly go back to Ahha if I needed for a particular job. Once I'm confident I have coding conventions down pat, I'll connect my drives and such direct to the parallel breakout. Currently running stepper motors via Compumotor OEM650 drives. Might try going to servos later. If that would entail a more sophisticated breakout board and said board will also work with the stepper setup, then I'd sure consider getting the better breakout board up front. Thanks, Jon ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
