Congratulations, A really nice problem/solution to be kept long and safe in the archives of EMC-USERS!!!
Javier On Sun, 2011-01-30 at 11:52 -0600, Jon Elson wrote: > Igor Chudov wrote: > > Now, my servo motor with the attached resolver still out of the rotary > > table, I have a HYOOGE success! > > > > The cause of jerkiness was a TOO HIGH input voltage to the resolver.I am > > hypothesizing that this caused too much voltage to be passed into the > > resolver converter input, causing it to crowbar or otherwise curtail the > > input for safety reasons, therefore curtailing and messing up the encoder > > calculations involving sine and cosine trigonometry. > > > > > No "crowbar", just overranging the A/D and causing the trig to not solve > accurately. > > I found it out because I thought, incorrectly as it turns out, that the > > voltage was too low. I increased the input voltage (by means of changing > > jumpers on Jon's resolver converter) and that made a bad problem truly > > horrible! The motor was now jerking like, um, let me just say it was jerking > > way too much. > > > > So, I went the other route and decreased voltage, which decreased > > jerkiness. > > > > At the lowest voltage, as it turns out, the motor turns smooth as a clock! > > > Yes, you must have 1:1 resolvers, so all jumpers in is right. That's > the way I test them with > my resolver on the bench. > > Glad you got it fixed. > > Jon > > ------------------------------------------------------------------------------ > Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)! > Finally, a world-class log management solution at an even better price-free! > Download using promo code Free_Logger_4_Dev2Dev. Offer expires > February 28th, so secure your free ArcSight Logger TODAY! > http://p.sf.net/sfu/arcsight-sfd2d > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)! Finally, a world-class log management solution at an even better price-free! Download using promo code Free_Logger_4_Dev2Dev. Offer expires February 28th, so secure your free ArcSight Logger TODAY! http://p.sf.net/sfu/arcsight-sfd2d _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users