On Sun, 2011-02-13 at 15:55 -0800, Doug wrote: > How would I do that. I think we can install some type of RDP. What would > your hourly rate be? > > Arch Fitters > Doug McCurtain (C.Ped) > President
I was hoping that someone on the list would be in your area, qualified and willing to come bye. When the user map was working, there seemed to be quit a few members in your area. I seem to recall someone in your area was going out to visit the grand opening of a company started by an ex-Microsoft guy with a rather large machine. It sounds to me like you just need to get your machine running. If that is the case, it seems best to have someone on site, but if you have time, we on the list could try to help. It's just a matter of supplying the proper information. Such as make and model of your machine and the relevant parts. Pictures help a lot. A short video of the motion you are have trouble with would be really good too. The better the information, the easier and more interesting it will be for us to help. Guessing about what you may or may not have and how it is configured is not as fun. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: Pinpoint memory and threading errors before they happen. Find and fix more than 250 security defects in the development cycle. Locate bottlenecks in serial and parallel code that limit performance. http://p.sf.net/sfu/intel-dev2devfeb _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
