kil...@bobodyne.com wrote: > >> Dear EMC users, >> I was asked to make the following change in the controller behaviour. >> As you know when we want to stop the running program and we push the stop >> program button, program stops and >> so does spindle from turning. Now the request is: when we stop the program >> by pressing the stop program button, we want the spindle to keep on turning >> if it was turning before pressing the >> stop program button. What do you think? This is because they do not want the >> tool in spindle to get stuck in the workpiece when we stop the program. We >> stop spindle by pressing spindle >> off button or by entering M5 in MDI later. Thanks >> There is an option which allows you to manually start the spindle (in MDI) before switching modes to manual, so that you can have the spindle running when you "run from line". I went looking for this in my configs files and can't find it. It may not be a setting in the .ini file, but something that is set when compiling EMC. Sorry my memory is so vague. I think this setting will at least partially help Farzin, too.
Jon ------------------------------------------------------------------------------ The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: Pinpoint memory and threading errors before they happen. Find and fix more than 250 security defects in the development cycle. Locate bottlenecks in serial and parallel code that limit performance. http://p.sf.net/sfu/intel-dev2devfeb _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
