Chris, and Stuart, it was EXACTLY as you said! Thanks!
i On Mon, Feb 28, 2011 at 9:58 PM, Chris Radek <ch...@timeguy.com> wrote: > On Mon, Feb 28, 2011 at 09:52:15PM -0600, Igor Chudov wrote: > > I set AXES=5. Should I say 9? I only have 5 axes. > > http://linuxcnc.org/docs/2.4/html/config_ini_config.html#sub:[TRAJ]-section > > > ------------------------------------------------------------------------------ > Free Software Download: Index, Search & Analyze Logs and other IT data in > Real-Time with Splunk. Collect, index and harness all the fast moving IT > data > generated by your applications, servers and devices whether physical, > virtual > or in the cloud. Deliver compliance at lower cost and gain new business > insights. http://p.sf.net/sfu/splunk-dev2dev > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Free Software Download: Index, Search & Analyze Logs and other IT data in Real-Time with Splunk. Collect, index and harness all the fast moving IT data generated by your applications, servers and devices whether physical, virtual or in the cloud. Deliver compliance at lower cost and gain new business insights. http://p.sf.net/sfu/splunk-dev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users