On Mon, 2011-03-21 at 17:00 +0200, fi wrote: ... snip > (Hope is not to late...) > Why don't you use one of Mariss Freimanis circuits ?!? > > http://www.artofcnc.ca/ChargePumpSafety.pdf > > or this from EDN > "Hardware watchdog timer accepts range of frequencies" > > http://www.edn.com/file/25543-Hardware_watchdog_timer_accepts_range_of_frequencies_PDF.pdf > > > Florin
Thanks for the links FLorin. What I have done so far is here: http://wiki.linuxcnc.org/emcinfo.pl?About_Charge_Pumps -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ Enable your software for Intel(R) Active Management Technology to meet the growing manageability and security demands of your customers. Businesses are taking advantage of Intel(R) vPro (TM) technology - will your software be a part of the solution? Download the Intel(R) Manageability Checker today! http://p.sf.net/sfu/intel-dev2devmar _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users