Hi,
I am an EMC2 user and currently I am doing some pieces which take several hours to mill. So, I would like to run my CNC while I am not at home (eg while I am at work), but still want to take an eye on my CNC through an IP camera + *get the possibility to remote control the AXIS GUI* (this is the important part ;-)) Basically what I would need is: 1) Remotely pause and continue a running GCode program. 2) While the program is paused, I need to be able to stop the spindle and the lube (these one are important because eg if the mill broke, I need to stop the spindle ASAP. but I don't know if it is possible since I can't stop the spindle from AXIS while a program is paused) I did some research but I am a bit lost ... I found that maybe I could use "axis-remote" or "emcrsh" ? Which one is should I use ? (remember that I want to keep axis running on my EMC2 machine). Can someone show me what to do to pause a running program ? (eg "axis-remote --mdi ?????") Note: - I have a SSH connection to the EMC2 computer - I could possibly wire a relay on the IP camera to control Axis but that's not my preferred solution and I don't even know If I can pause EMC2 from an external contact ? Many thanks for your help, Xavier P.S. why is there a mailing list + a forum ? Are the persons both subscribed to the forum and to the mailing list ? ------------------------------------------------------------------------------ Xperia(TM) PLAY It's a major breakthrough. An authentic gaming smartphone on the nation's most reliable network. And it wants your games. http://p.sf.net/sfu/verizon-sfdev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
