On Sat, 2011-04-23 at 15:15 -0500, forget color wrote: > CMOS battery died on my EMC pc and I lost my bios settings. > > IIRC, I want the parallel port on EPP? ... snip
You only need EPP if you want to run an EPP type device on the port, such as an FPGA hardware signal generator-I/O board. Just wiggling pins on and off for user I/O can use SPP or what ever the BIOS is already set to. I don't think the BIOS setting has any effect on add-on PCI parallel ports. If you need to set an add-on card (non-NetMos) to EPP, see the showport.c file here: http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Startech -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ Fulfilling the Lean Software Promise Lean software platforms are now widely adopted and the benefits have been demonstrated beyond question. Learn why your peers are replacing JEE containers with lightweight application servers - and what you can gain from the move. http://p.sf.net/sfu/vmware-sfemails _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
