EMC2 is not a G code generator and cannot spoon feed G code to anything. You need to look at CAD/CAM software.
i On Mon, May 2, 2011 at 3:26 PM, Speaker To-Dirt <[email protected]>wrote: > > > Hi All: > > I have a friend who just got a nicely working > Shizuoka with an old Bandit controller. Now I want to help > him retrofit from the 80's to today, but he's pretty leery > of losing his machine for a 6 month project. ... Not an > outrageous fear. > > Does anybody know how of a way for EMC2 or another > package like Mach3 to spoon feed modern g-code files to the > Bandit controller? I'm looking for a minimal intrusion to > allow my friend to have the ability to use a computer from > the 21st cent to run his mill. > > Thanks. > Andrew > > > > ------------------------------------------------------------------------------ > WhatsUp Gold - Download Free Network Management Software > The most intuitive, comprehensive, and cost-effective network > management toolset available today. Delivers lowest initial > acquisition cost and overall TCO of any competing solution. > http://p.sf.net/sfu/whatsupgold-sd > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ WhatsUp Gold - Download Free Network Management Software The most intuitive, comprehensive, and cost-effective network management toolset available today. Delivers lowest initial acquisition cost and overall TCO of any competing solution. http://p.sf.net/sfu/whatsupgold-sd _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
