For certain classes of work you dont need special kinematics, I have been cutting gears for clocks on a mill with stacked A on B, I hand craft the gcode though, as it happens to suit the work I do.
Dave Caroline On Tue, May 3, 2011 at 12:57 AM, Steve <st...@tgifinc.com> wrote: > I am interested in adding a trunnion and rotary table to my existing > machining center. The frame is excellent but the control is dead so I was > thinking about using EMC2. Is there someone out there that has a successful > running machine that I could talk to and get me going? Also is creating the > kinematics for this type of 5 axis machine something that could be covered > at the EMCfest? > > > > Thank you > > > > Steve Van Der Loo > > Tube Gauge Inspection Fixtures Inc > > 420 Neptune Cres > > London, ON N6M 1A1 > > > > www.tgifinc.com > > > > 519-659-3418 > > fax 519-489-1413 > > > > ------------------------------------------------------------------------------ > WhatsUp Gold - Download Free Network Management Software > The most intuitive, comprehensive, and cost-effective network > management toolset available today. Delivers lowest initial > acquisition cost and overall TCO of any competing solution. > http://p.sf.net/sfu/whatsupgold-sd > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ WhatsUp Gold - Download Free Network Management Software The most intuitive, comprehensive, and cost-effective network management toolset available today. Delivers lowest initial acquisition cost and overall TCO of any competing solution. http://p.sf.net/sfu/whatsupgold-sd _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
