Andrew, I experienced this problem too. In my hexaglide hexapod, for which I developed the kinematics starting from genhexkins.c It worked using at *.ini file in section
[DISPLAY] the entry GEOMETRY = XYZA-BC The minus reverses the rotation sense of B axis. Good luck, Javier On Wed, May 11, 2011 at 12:57 PM, andy pugh <[email protected]> wrote: > On 6 May 2011 10:36, Andrew <[email protected]> wrote: > > > 3. The tool cone at AXIS preview plot tilts when angular axes change. It > is > > set for XYZBC, but I need XYZAB. Which file should I edit to change this? > > This should be controllable by the GEOMETRY setting in the INI file. > > http://www.linuxcnc.org/docview/html/config_ini_config.html#sub:%5BDISPLAY%5D-section > > -- > atp > "Torque wrenches are for the obedience of fools and the guidance of wise > men" > > > ------------------------------------------------------------------------------ > Achieve unprecedented app performance and reliability > What every C/C++ and Fortran developer should know. > Learn how Intel has extended the reach of its next-generation tools > to help boost performance applications - inlcuding clusters. > http://p.sf.net/sfu/intel-dev2devmay > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Achieve unprecedented app performance and reliability What every C/C++ and Fortran developer should know. Learn how Intel has extended the reach of its next-generation tools to help boost performance applications - inlcuding clusters. http://p.sf.net/sfu/intel-dev2devmay _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
