On Sun, 2011-07-24 at 10:42 -0700, Kirk Wallace wrote: > On Sun, 2011-07-24 at 10:36 -0300, Christopher Purcell wrote: > > Can someone provide the timing parameters (as required by Stepconf/EMC2) > > for the Stepperworld FET4 board? > > I don't know what chips are on your board, but my guess this page might > apply: > http://www.ucn5804b.com/ > > If so, the timing data on this datasheet (page 3) might apply also: > http://www.alltronics.com/mas_assets/acrobat/93I002.pdf > > Then again, might not. Good luck. >
Oops, I missed this one: http://www.ucn5804b.com/StepGenieSpec.pdf -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ Magic Quadrant for Content-Aware Data Loss Prevention Research study explores the data loss prevention market. Includes in-depth analysis on the changes within the DLP market, and the criteria used to evaluate the strengths and weaknesses of these DLP solutions. http://www.accelacomm.com/jaw/sfnl/114/51385063/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
